Newark Boys Chorus School

Where To Put Chorus In Signal Chain

Chorus In Signal Chain

Where To Put Chorus In Signal Chain

Figuring out where to put your chorus pedal in your signal chain can be a daunting task. After all, the wrong placement can make all the difference between a great sound and an unusable one. But don’t worry – with a few simple guidelines; you’ll have your chorus sounding great in no time! Where to put the chorus in the single chain?

In this article, we’ll discuss the best places to put your chorus pedal in order to get the most out of it. We’ll explore why different placements work better than others and provide some tips on how to get the best results. So, let’s dive in!

Chorus In Signal Chain

Understanding Your Signal Chain

It’s essential to understand your signal chain in order to get the most out of your pedals. A signal chain is simply the order in which your musical equipment is connected, and this can drastically change the sound you create.

To make sure you’re getting the best results, it’s important to understand how each piece of gear affects the tone. The signal chain has a big impact on your overall sound, but there are still certain pieces of equipment that should be placed at different points in the chain for optimal performance.

Pedals like chorus effects can be placed before or after the distortion or other overdrive pedals for different tones and textures. Reverb pedals usually come last in the signal chain since they need an already established tone to work off of so they don’t overpower all other effects.

Understanding how each pedal affects your sound is key to creating a great mix. Knowing what works best for your setup will help you get better results when playing live or recording in the studio. With that knowledge, you’ll be able to create a signal chain that helps bring out the best of each effect and allows them all to work together as one cohesive unit.

Understanding how they relate to each other will give you more control over your sound and allow you to craft unique tones that stand out from the crowd.

Placing Your Chorus Pedal First In The Chain

One of the advantages of placing your chorus pedal first in the chain is that it can easily be used to add texture and color to your tone. It can also be used to thicken up and warm up the sound of clean tones.

Creative uses include using the pedal to add a subtle movement to your playing or to create a unique vibrato effect. Finally, by placing the pedal first in the chain, you can also use it to add depth to your other pedals.


When it comes to placing a chorus pedal in the signal chain, there are certain advantages to putting it first.

To begin with, having the chorus effect as the initial element helps to create more depth and nuance in the tone of your instrument. By having this pedal at the front of your signal chain, you’re able to add warmth and richness to any sound you choose. This can especially be helpful when playing high-gain music, as it will help broaden the scope of your sound.

Secondly, using a chorus pedal first can be useful for creating a more spacious soundscape that adds dimension to any riff or solo you play. When combined with reverb or delay pedals after it, this can really help give a song an airy feel that is perfect for ambient styles of music.

Last but not least by having this pedal first in your chain, you get an added level of control and customization over how much chorus effect you want included in your sound. You’ll be able to dial in exactly how much modulation and depth you need without compromising on quality or tone.

All in all, placing your chorus pedal first has its clear advantages when it comes to creating unique sounds from your instrument.

Creative Uses

Having a chorus pedal at the beginning of your signal chain can open up some really interesting creative possibilities. For example, by adding a subtle amount of modulation to your sound, you can create unique sounds that are perfect for ambient and atmospheric music.

Additionally, by playing with different settings and combining it with other effects, you can make even more interesting, layered tones that will give your music a truly unique character.

You could even use the chorus pedal to drive an overdrive pedal in order to get an intense distortion effect that is full of life and texture.

With so many options available to you, it’s easy to explore and experiment with different sounds until you find something that works perfectly for your needs.

Placing Your Chorus Pedal After Your Distortion Pedals

It is a widely accepted fact that 90% of guitarists place their chorus pedal after their distortion pedals in the signal chain. This makes sense, as the chorus will add more depth and texture to the sound produced by the distortion. Therefore, it’s important to understand how to properly place your chorus pedal after your distortion pedals for optimum performance.

Here are four key steps to follow when placing your chorus pedal after your distortion pedals:

  1. Make sure that you plug the output of your distortion pedal into the input of your chorus pedal.
  2. Set all tone knobs on both pedals at noon for a neutral starting point.
  3. Adjust each knob slowly until you get the desired sound.
  4. Plug the output of the chorus pedal into your amplifier.

By following these steps, you can create a wide range of tones with your chorus pedal without affecting any other effects in your signal chain.

Moving on, we’ll discuss how and why to place your chorus pedal last in the chain.

Placing Your Chorus Pedal Last In The Chain

The benefits of putting a chorus pedal last in the chain are clear; it allows you to get the most out of the effect and it won’t interfere with the tone of any of your other pedals.

Tone quality wise, it will give you a nice, full sound with plenty of depth and dynamics. You won’t have to worry about the chorus masking the sound of other effects, either.

Placing your chorus pedal last in the chain is a great way to ensure your tone stays pristine.


The benefits of placing a chorus pedal last in the signal chain are truly remarkable.

Firstly, it ensures that all other effects have been processed before the chorus can be added. This allows for a more natural sound that won’t be muddied up by any other pedals.

Secondly, it makes it easier to blend different levels of chorus within a single patch. By not having to worry about the order of effects or how they interact, you can just dial in the perfect amount of chorus without any hassle.

Finally, having your chorus pedal at the end also means that you get the most out of it since it’s being sent through all your other pedals – giving you maximum depth and tonal variation.

Tone Quality

All of these advantages are great, but what really matters is the tone quality you get out of your chorus pedal. When you place it at the end of your signal chain, you can really hear its true potential.

The full range of tonal possibilities becomes available and the subtleties come alive. It can transform your soundscape completely, creating an atmosphere of lushness and depth that was never achievable before.

Additionally, all of the other pedals will be taking advantage of the chorus, adding more complexity to their sounds as they interact with each other. With your chorus pedal last in the chain, you can really take advantage of every bit of tone-shaping power it has to offer!

Using Multiple Chorus Pedals

Once you’ve placed your chorus pedal last in the chain, it’s time to look at experimenting with different placements. This can be done by using multiple chorus pedals. When using two or more chorus pedals in one signal chain, it’s important to consider how they will interact and affect each other.

PedalPositionAffects Other Pedals?
Chorus 1End of ChainNo
Chorus 2Middle of ChainYes
Chorus 3Beginning of ChainYes

When using multiple chorus pedals, it’s best to place one at the beginning of the chain, another in the middle, and a third at the end. The pedal at the beginning will set the tone for your sound and will act as a foundation for your overall soundscape. The middle pedal will interact with other effects and shape your sound further. Finally, the last pedal will provide an additional layer of sound that allows you to further refine your tone.

By experimenting with different placements of multiple chorus pedals, you can create unique sounds that emphasize different aspects of your playing style. Placing two or more chorus pedals correctly in a signal chain can bring out subtleties that would otherwise not be present when just using one pedal. With careful placement and experimentation, you’ll be able to find the perfect combination that fits your musical tastes! Transitioning into the subsequent section about experimenting with different placements without saying ‘step’, there are endless possibilities when it comes to creating and sculpting tones with multiple chorus pedals.

Experimenting With Different Placements

The placement of a chorus in the signal chain is analogous to the dispersal of sparks from a fire crackling in the night. Each spark is an individual part of the music, joining together to form the soundscape, and the chorus can be seen as one of these sparks, influencing how we hear and feel when listening.

Where this spark is placed can drastically change its effect: near the beginning or end, it may build anticipation or invoke nostalgia; at its apex, it can bring about great emotion; and floating somewhere in between, it can add texture and complexity to a song.

To truly find out what works best for any given situation requires experimentation.

By playing with different placements of the chorus on individual tracks, we can discover new ideas that will make our music stand out. Through trial and error, we can create sonic landscapes that will captivate our listeners.

Frequently Asked Questions

What Is The Difference Between A Chorus Pedal And A Phaser Pedal?

Chorus and phaser pedals are both modulation effects used in guitar playing. The difference between the two lies in the type of sound they produce. A chorus pedal creates a warm, shimmering effect by doubling an audio signal and then adding a slight delay to create a thicker sound.

On the other hand, a phaser pedal produces a swirly, psychedelic type of effect by shifting the phase of certain frequencies. Both are great for adding depth and texture to any guitar tone!

How Can I Control The Volume Of The Chorus Effect?

The volume of your chorus effect can be controlled with the ‘mix’ or ‘depth’ knob, which controls the amount of wet signal mixed in with the dry signal. This is usually found on most chorus pedals, and it’s important to adjust this setting to find the right balance for your sound.

Additionally, you can experiment with other effects pedals to further shape and control the volume of your chorus effect. For example, you can use a compressor pedal before your chorus effect to achieve a smooth swell in volume or an overdrive pedal after your chorus effect to add more gain and presence.

What Other Effects Can I Add To The Signal Chain After The Chorus Pedal?

So, you’ve got your chorus pedal in the signal chain, and you’re ready to rock!

But wait, what else can you add? Well, why not go wild and try a whole bunch of other effects?

From delays to reverbs to flangers and more – the possibilities are endless! Don’t be afraid to experiment with different combinations until you find the sound that’s perfect for you. And hey, don’t forget that you can always control the volume of the chorus effect, too – just in case it gets a bit too loud.

What Type Of Guitar Is Best Suited For Chorus Effect?

When it comes to finding the best guitar for a chorus effect, single-coil guitars such as the Fender Stratocaster are a great option. These guitars have slightly more twangy tones, which can help to create a bright and shimmering effect when using a chorus pedal.

Humbucker pickups, on the other hand, provide a thicker and warmer tone, meaning that they are better suited for producing heavier and richer sounds with the chorus effect. Ultimately, what type of guitar you should choose depends on your musical style and what kind of sound you’re looking to achieve.

What Are The Advantages Of Using A Chorus Pedal In The Signal Chain?

The shimmering sound of a chorus pedal in the signal chain can be mesmerizing, offering a unique tone to your guitar and creating an immersive experience for both the player and listener.

By using a chorus effect, you can add depth to your sound, making it feel like multiple guitars are playing at once.

The effect also adds movement to the overall mix, giving your guitar parts more texture and versatility.

Chorus pedals are incredibly versatile, allowing you to tweak the parameters for subtle or drastic changes in sound. This makes them great for any genre of music!


In conclusion, chorus pedals are a great addition to any guitar signal chain. They add an extra layer of depth and texture to your sound that can’t be achieved with other effects.

When using chorus, it is important to use the right type of guitar that is suited for the effect in order to achieve the best tones. You can learn more about what is a chorus in literature.

Additionally, controlling the volume of the chorus effect will help you dial in just the right amount of effect for your playing style. With all these factors taken into consideration, you’ll be rocking like a time-traveling virtuoso in no time!